BIG SIZE PLYWOOD FOR MODERN INDUSTRIES

THE FILM FACED PLYWOOD SIZES RANGE INCLUDES THE MAIN 4x8 AND 5x10 FORMATS,
AS WELL AS THE POPULAR 5x11, 5x8, 4x10, 2x8 FORMATS. CALLS US AT +84-387209760 (WAHTSAPP)

OTHERS
Casting forms

SIZES, MM (FT)

610x2440, 625x2500 (2x8)

1000x3000 (3x10)

1220x2440x1220, 1250x2500x1250 (4x8x4)

1250x3050(4x10)

1250x3300 (4x11)

1500x1830, 1525x1830 (5x6)

1500x1830, 1525x2135 (5x7)

1500x2440,1525x2500 (5x8)

1525x2700,1500x2700 (5x9)

1500x3000,1525x3050(5x10)

1500x3300,1525x3300(5x11)

LENGTH / WIDTH TOLERANCES, MM

LENGTH/WIDTH OF PLYWOOD SHEETS, MM	MAXIMUM DEVIATION, MM
100 < L/W < 780	±1,0
1200 < L/W < 1350	±3,0
1500 < L/W < 2500	±4,0
2700 < L/W < 3660	±5,0

THICKNESS AND NUMBER OF PLIES

NOMINAL THICKNESS, MM	NUMBER OF PLIES	LOWER VALUE (MIN), MM	TOP VALUE (MAX), MM
3	3	2.5	3.3
4	3	3.5	4.3
5	5	4.5	5.3
6	5	5.4	6.4
6.5	5	5.9	6.9
7	5	6.4	7.4
8	7	7.35	8.45
9	7	8.35	9.45
10	7;9	9.3	10.5
11	9	10.3	11.5
12	9	11.3	12.5
14	9;11	13,15	14,65
15	11	14,15	15,65
16	11	15,15	16,65
17	13	16,1	17,7
18	11; 13; 15	17,1	18,7
20	15	19	20,8
21	13;15;7	20	21,8
24	15;17	22,9	24,9
27	19	25,8	28
28	19	26,8	29
30	21	28,7	31,1
35	25	33,6	36,2
38	25;27	36,5	39,3
40	29	38,4	41,4

SPECIFICATIONS OF UPG RAW PLYWOOD

THICKNESS, MM	3-40
GRADE	B/BB (l/ll), S/BB (l/ll), BB/BB (ll/ll), BB/CP (ll/lll), BB/C (ll/IV), CP/CP (lll/lll), CP/C (lll/IV), С (IV)
SURFACE TYPE	Sanded on both sides (S2S), sanded on one side (S1), unsanded (NS)
GLUE	INT, EXT(WBP)
FORMALDEHYDE EMISSION CLASS	E1
WATER RESISTANCE	High (EXT)
DENSITY, KG/M3	640-700
MOISTURE CONTENT, %	5-11
Technical requirements.

SPECIFICATIONS OF UPG FILM FACED PLYWOOD

THICKNESS, MM	6-40
SURFACE TYPE	Smooth/smooth (F/F), smooth/wiremesh (F/W), smooth/CP (F/CP)
FILM DENSITY, G/M2	120, 220
FORMALDEHYDE EMISSION CLASS	E1
WATER RESISTANCE	High
DENSITY, KG/M3	640-700
MOISTURE CONTENT, %	5-15
EDGE SEALING	Acryl-based water resistant paint
Technical requirements.

SPECIFICATIONS OF UPG FILM FACED PLYWOOD

FORMALDEHYDE EMISSION CLASS		FORMALDEHYDE EMISSION
E0

STRENGTH INDICATORS

INDEX		REQUIREMENT	REQUIREMENT EN 13986:2004 + A12015 EN 636:2012 + A12015 EN 314:1993	AVERAGE ACTUAL VALUE 2025*
Static bending strength for thicknesses of 6-40 mm, MPa, not less	along the grain of face plies	25	not standardized	80
	across the grain of face plies	not standardized		70
Modulus of elasticity in static bending, MPa, not less	along the grain	7 000	7 000	11 000
	across the grain	not standardized		8 000
Shear strength for shearing through adhesive layer (adhesive strength), MPa, not less	after boiling in water for 6 hours			2
	after soaking for 24 hours			2
Moisture content, %		5-10		6-9

* Individual values of indicators may differ from the average both up and down.