Empowering Success Together
Achieve Your Goals with Our Expert Guidance
Film Faced Plywood Manufacturer in Vietnam
Vietnam-Manufactured Film Faced Plywood for International Construction Markets
NAM TIEN PRODUCTION AND EXPORT CO., LTD manufactures and exports plywood products from Vietnam, supplying international B2B buyers in Europe, the United States, Australia, New Zealand and the Middle East.
Our Film Faced Plywood is designed for concrete formwork and construction-related applications. Product specifications can be discussed according to the buyer’s requirements, including panel thickness, dimensions, film surface, core construction, bonding performance and packaging.
For importers, distributors, construction material suppliers and formwork companies, selecting the right Film Faced Plywood means evaluating the complete panel construction rather than looking at film weight or thickness alone.
Product: Film Faced Plywood
Manufacturing Country: Vietnam
Manufacturer & Exporter: NAM TIEN PRODUCTION AND EXPORT CO., LTD
Main Application: Concrete Formwork and Construction
1. Film Faced Plywood Product Overview
Film Faced Plywood is a wood-based panel covered with a resin-impregnated film, commonly phenolic film, on one or both surfaces.
The film layer provides a finished working surface intended for applications involving concrete contact, moisture exposure and repeated handling.
Film Faced Plywood is commonly used in:
- Concrete wall formwork
- Slab and floor formwork
- Column formwork
- Beam formwork
- Construction shuttering
- General concrete-forming systems
The suitability of a panel depends on its core construction, veneer quality, adhesive system, film characteristics, thickness, mechanical properties and the formwork design.
A film-faced surface alone does not establish the structural load capacity of a plywood panel.
2. Film Faced Plywood Structure
A typical Film Faced Plywood panel consists of several bonded veneer layers covered by a protective film surface.
Film Surface
The surface is commonly made with resin-impregnated film, such as phenolic film.
Depending on the agreed product specification, buyers may request:
- Brown film
- Black film
- Smooth film surface
- Textured or anti-slip surface, where available
- Single-side or double-side film coating
The actual film type, weight and surface finish should be confirmed in the product specification.
Plywood Core
The core consists of bonded wood veneer layers.
Core construction is an important factor affecting panel strength, stiffness, dimensional stability and overall performance.
Buyers should confirm the actual wood species, veneer arrangement, number of plies and core construction for the product being ordered.
Panel Edges
Panel edges are exposed to moisture and handling during construction.
Edge sealing or edge treatment can be specified according to the order. Cut edges and drilled holes may require additional protection during use.
3. Film Faced Plywood Technical Specifications
The following table identifies the main parameters to be confirmed when purchasing Film Faced Plywood from NAM TIEN.
| Technical Parameter | Product Specification |
|---|---|
| Product Name | Film Faced Plywood |
| Manufacturing Country | Vietnam |
| Manufacturer | NAM TIEN PRODUCTION AND EXPORT CO., LTD |
| Panel Thickness | Confirm according to order |
| Panel Dimensions | Confirm according to order |
| Face and Back | Film-faced surface |
| Film Type | Confirm according to order |
| Film Weight | Confirm in g/m² |
| Film Colour | Confirm according to order |
| Core Material | Confirm wood species and construction |
| Number of Plies | Confirm according to thickness and construction |
| Adhesive System | Confirm according to product specification |
| Bonding Performance | Verify through applicable test results |
| Moisture Content | Confirm through production specification or testing |
| Density | Confirm through product testing |
| Mechanical Properties | Confirm through applicable test reports |
| Thickness Tolerance | Agree before production |
| Length and Width Tolerance | Agree before production |
| Edge Treatment | Confirm according to order |
| Packaging | Export packaging according to buyer requirements |
Important: Final specifications must be confirmed by NAM TIEN’s current production data sheet and the agreed purchase order. No unverified technical value should be treated as a guaranteed factory specification.
Technical Parameters Buyers Should Evaluate
Film Weight
Film weight is generally expressed in grams per square metre (g/m²). Buyers should confirm whether the stated value refers to one surface or another measurement basis specified by the manufacturer.
Film weight should be evaluated together with the resin system, surface finish, bonding to the plywood substrate and intended application.
A higher film weight does not automatically guarantee longer service life or a fixed number of concrete pours.
Panel Thickness
Panel thickness should be selected according to the formwork system, support spacing, loading conditions and project requirements.
The thickness alone cannot determine the allowable concrete pressure or structural capacity.
Core Construction
Core species, veneer thickness, number of plies and veneer arrangement influence the mechanical properties of the finished panel.
Buyers requiring structural performance should request the relevant test data rather than relying only on a general description such as hardwood core.
Bonding Performance
The adhesive system and bonding performance are important when plywood is exposed to moisture during concrete-forming operations.
Buyers should specify the required bonding classification and test method. Any compliance statement should be supported by relevant product documentation.
4. Applications of Film Faced Plywood
Concrete Wall Formwork
Film Faced Plywood can be used as a forming panel for concrete walls when the panel construction and formwork system are suitable for the project.
The selected panel thickness, support spacing and structural design must account for the expected fresh-concrete pressure.
Slab and Floor Formwork
Film Faced Plywood can be incorporated into slab-forming systems.
Panel selection should consider the weight of fresh concrete, construction loads, support arrangement and project engineering requirements.
Column Formwork
Film Faced Plywood can be used in column-forming applications where panel dimensions, surface finish and mechanical properties meet the project requirements.
Beam Formwork
Plywood panels can form part of beam-forming systems when selected and supported according to the formwork design.
Reusable Formwork Systems
Film Faced Plywood is commonly used in formwork systems where panels are removed, cleaned, stored and used again.
Actual reuse performance depends on:
- Film quality and adhesion
- Core construction
- Edge protection
- Cutting and drilling
- Release-agent selection
- Concrete mix and site conditions
- Cleaning procedures
- Stripping methods
- Handling and storage
For this reason, NAM TIEN does not state a universal number of reuses without product-specific evidence and defined operating conditions.
5. Quality Control Considerations
For construction plywood, product consistency and technical verification are important.
The following items should be included in the agreed inspection requirements where applicable.
5.1 Appearance Inspection
Check the panel surface for:
- Film scratches
- Blisters
- Film separation
- Surface contamination
- Uneven coating
- Visible damage
5.2 Dimensional Inspection
Check:
- Panel thickness
- Panel length
- Panel width
- Squareness
- Edge condition
The measurement method and acceptable tolerances should be agreed before production.
5.3 Bonding Inspection
Bonding performance should be evaluated according to the specified test method and required classification.
Visual inspection alone cannot establish compliance with a bonding standard.
5.4 Mechanical Property Testing
For applications involving structural loads, buyers may require test data for relevant mechanical properties, such as:
- Bending strength
- Modulus of elasticity
- Other specified structural properties
The required test methods and acceptance values should be confirmed in the project specification.
5.5 Packaging Inspection
Before shipment, the packaging should be checked for:
- Bundle stability
- Protective wrapping
- Edge and corner protection
- Strapping condition
- Package identification
- Shipping marks
Inspection requirements can be agreed between the buyer and NAM TIEN before production.
6. Technical Standards and Product Verification
International buyers may use different standards depending on their destination country, construction application and purchasing specification.
The following are useful technical references when evaluating concrete-forming plywood.
Europe
Buyers may specify relevant European plywood standards, including EN 314-2 for bonding quality, EN 636 for plywood specifications and EN 315 for dimensional tolerances.
Where the product is intended for construction use, buyers should also determine whether EN 13986 and applicable construction-product conformity requirements are relevant to the product and its intended use.
The applicable standard, product scope and documentation must be confirmed before making any conformity or CE-marking claim.
United States
APA’s technical guidance on concrete form panels explains that panel selection depends on product grade, performance category, thickness, support spacing, concrete pressure and face-grain orientation.
APA also identifies Plyform as a specially manufactured plywood product for concrete-forming applications.
NAM TIEN should not claim APA certification, APA membership or PS 1 compliance unless the relevant qualification and supporting documentation apply to the actual product.
Australia and New Zealand
AS/NZS 2269 is a reference standard for structural plywood. Buyers should confirm whether it applies to the specific product and intended use.
A general Film Faced Plywood product description does not by itself establish structural plywood compliance.
Middle East
Project requirements may refer to EN, BS, ASTM or other technical specifications.
Buyers should provide the destination country, project specification and required test standards before placing an order.
A product should only be declared compliant with a particular standard when the applicable product requirements have been verified and supporting evidence is available.
7. Film Faced Plywood for International Markets
NAM TIEN focuses on international B2B plywood supply. Our Film Faced Plywood product information can be discussed according to destination-market requirements.
Europe
European importers and construction material distributors may require detailed product specifications, bonding-quality information, technical test reports and relevant timber supply-chain documentation.
Buyers should confirm the applicable European product and construction requirements for their intended use.
United States
U.S. buyers may require specific panel grades, performance categories, dimensions and technical data for concrete formwork.
The project engineer or formwork designer should confirm the required panel properties and support arrangement.
Australia
Australian buyers should identify the applicable plywood specifications and construction requirements.
Where structural performance is required, the buyer should confirm the relevant standard, test evidence and project acceptance requirements.
New Zealand
New Zealand importers should confirm the required panel construction, intended application and applicable building or project specifications.
Middle East
Buyers in the United Arab Emirates, Saudi Arabia, Qatar, Oman, Kuwait and other Middle Eastern markets should identify the destination country and project requirements.
Specifications may differ between contractors, distributors, formwork suppliers and individual construction projects.
8. Export Packaging and Shipping
Film Faced Plywood supplied to overseas buyers should be packed according to the panel dimensions, order quantity, transportation method and destination requirements.
Packaging arrangements may include:
- Plywood bundles
- Protective top and bottom sheets
- Edge and corner protection
- Steel or plastic strapping
- Waterproof outer wrapping where specified
- Package labels and shipping marks
The final packaging method should be agreed before production and container loading.
Buyers should also confirm package dimensions, gross weight, loading quantity and container requirements with the exporter and freight forwarder.
9. Why Consider a Vietnam-Based Film Faced Plywood Manufacturer?
Vietnam has an established wood-processing industry and plantation timber resources, including Acacia and Eucalyptus.
For international buyers, sourcing plywood manufactured in Vietnam provides access to a manufacturing and export location serving multiple international markets.
When evaluating a supplier, buyers should focus on verifiable information:
- Actual manufacturing location
- Product construction
- Wood species and material origin
- Technical specifications
- Quality inspection procedures
- Applicable test reports
- Export documentation
- Production and shipment arrangements
The country where plywood is manufactured is not necessarily the country where all timber materials were harvested.
Customs origin and preferential tariff eligibility must also be determined under the applicable rules for the product and destination market.
10. Request Film Faced Plywood Specifications and Quotation
To help us review your requirements, please provide the following information:
- Required panel thickness
- Required panel dimensions
- Film colour and surface type
- Film weight, if specified
- Required core wood species
- Adhesive or bonding requirements
- Required mechanical properties
- Destination country and port
- Intended application
- Required technical standards or test reports
- Estimated order quantity
- Packaging and loading requirements
This information helps us review the requested product configuration and discuss available specifications and export arrangements.
11. Contact NAM TIEN – Vietnam Film Faced Plywood Manufacturer
NAM TIEN PRODUCTION AND EXPORT CO., LTD
Vietnam Plywood Manufacturer & Exporter
Address: Namsach Industrial Zone, Al Quoc Ward, Hai Duong City, Hai Duong, Vietnam
Email: sales@vietnamplywoodgroup.com
WhatsApp: +84 387 209 760
Phone / WhatsApp: +84 39 698 8096
Website: https://vietnamplywoodgroup.com/
For Film Faced Plywood inquiries, contact our team with your required specifications, destination market and estimated order quantity.
NAM TIEN PRODUCTION AND EXPORT CO., LTD – Film Faced Plywood Manufactured in Vietnam for International Construction Markets.
Technical References
The following sources provide technical background for selecting and evaluating plywood used in concrete formwork:
- APA – Concrete Plyforms: https://www.apawood.org/engineered-wood-products/plywood-osb/concrete-plyforms/
- APA – Concrete Forming: https://www.apawood.org/applications-systems/industrial-applications/concrete-forming/
- APA – Concrete Forming Design and Construction Guide: https://www.apawood.org/guides-tools-training/technical-document-library/technical-guides/concrete-forming-designconstruction-guide/
Technical standards and references are provided for general guidance. They do not constitute a declaration that every NAM TIEN Film Faced Plywood product is certified or compliant with those standards. Actual product specifications and conformity claims must be supported by the relevant factory documents and test reports.
